Bespoke Woodcraft StudioTools for sale by Ahmed
626-825-2400ahmed@bespokewoodcraft.studioEmail

Shop tools I am selling

Everything is like new or new in the box.

Pick what you want and send me the list. Nothing is bought or paid for on this page, and a deposit is what holds an item for you.

30
tools for sale
6
One-Time Tools
1
not sold in the US
  1. Tick the tools you want. A running total follows along at the bottom of the screen.
  2. Add your name and number. Optional, but it tells me who the list came from.
  3. Send it to me. Use Text it to me, Email it, or Download and send the file however you like.
  4. Want to see the real thing first? Hit Ask for a photo on any tool and the request goes out with your list. You do not have to be able to text.
Multi-buy

The more you take, the better the price. Send me the list and I will come back with a number for the whole lot.

Condition
Like new or new in box, sold as-is
Pickup
Covina, California
Payment
Cash, Venmo or Zelle
Photos
Real photos of any item on request
Shipping
Happy to ship, you cover the cost. Ships from 91722, so you can price it up yourself: USPS UPS FedEx. Anything marked pickup only is too big or heavy to post.
30 tools available

Squares and layout

6

Every square in the sale, sized largest to smallest, then the rules, the story stick and the marking tools.

10Woodpeckers 6-inch Carpenter's Square, one piece
Woodpeckers

6-inch Carpenter's Square, one piece

One-Time Tool - February 2018 run, no longer made

A carpenter's square machined from a single block of aluminum, so there is no joint between blade and foot to knock out of square. The hand opening lets you carry it and hold it against the work with the same grip, and the angle marks on the hypotenuse turn it into a protractor for the cuts that actually come up.

  • Machined from one solid block, no fasteners and nothing to shift
  • Blade and foot 7/32 in. thick, 23/32 in. overall width
  • Hand opening through the body; the 3-3/4 in. version has a finger hole
  • Angles marked 18, 22-1/2, 30, 45, 60, 67.5 and 72 degrees
  • Engraved scale down the vertical edge, graduated every 1/16 in.
My price, no tax$50
46Woodpeckers Stair Gauge Set, four gauges in two depths
Woodpeckers

Stair Gauge Set, four gauges in two depths

STG-22

Four stair gauges that clamp to the edge of a square and turn it into a fixed stop, so the same rise and run can be marked down a stringer without resetting anything. Two depths are included: the deep pair reaches past the rounded edges of construction lumber, and the thin pair suits the crisp corners of cabinet stock.

  • Four gauges: a 3/4 in. deep pair and a 1/4 in. thin pair
  • Fits framing, carpenter and DelVe squares, and precision triangles
  • Turned on CNC Swiss lathes, anodized in Woodpeckers red
  • Anodizing stops the aluminum leaving grey marks on bare wood
  • Includes the wall-mountable Rack-It; made in Strongsville, Ohio
Retail price$69.99
Sales tax I paid$6.65
Total I paid$76.64
My price, no tax$40
48%offYou save$37off the $76.64 it costs new
See it at Woodpeckers
7Woodpeckers Skill Square
Woodpeckers

Skill Square

SKSQ-AI-22
Brand new, never usedOne-Time Tool - 2021 run, no longer made

A triangle rafter square for square and angle layout, blade laser cut from 1/16 inch stainless plate with edges machined to +/-0.0085 degrees. At about a third the thickness of a cast speed square, the scale reads against the work with far less parallax.

  • 6" of usable blade scale, graduated in 1/16ths
  • Blade laser cut from 1/16" stainless plate; edges within +/-0.0085 degrees
  • Red anodized aluminum beam, 3/4" thick x 1" wide
  • Two scribing guide sets: 1/4" centers to 3", 1/8" full length
  • Degree scale plus common and hip/valley rafter tables; Rack-It included
Retail price$189.99
Sales tax I paid$18.05
Total I paid$208.04
My price, no tax$120
42%offYou save$88off the $208.04 it costs new
See it at Woodpeckers
8Woodpeckers Skill Square XT
Woodpeckers

Skill Square XT

SKSQ-AI-XT-22
Brand new, never usedOne-Time Tool - 2021 run, no longer made

The extended version of the SkillSquare rafter square, same 1/16 inch stainless blade and machined +/-0.0085 degree edges. The core runs past the beam with a 6 inch scale on both sides, so the tail hooks an edge and marks away from board ends.

  • Same 1/16" stainless blade and +/-0.0085 degree machined edges
  • Core extends past the beam with a 6" scale, both sides
  • Blade drops about 1/2" below the beam, a second registration edge
  • Red anodized aluminum beam, 3/4" thick x 1" wide
  • Two scribing guide sets; wall mountable Rack-It included
Retail price$279.95
Sales tax I paid$26.60
Total I paid$306.55
My price, no tax$175
43%offYou save$132off the $306.55 it costs new
See it at Woodpeckers
28Woodpeckers Deluxe Trammel System
Woodpeckers

Deluxe Trammel System

DELTRMSET
Brand new, never usedOne-Time Tool - no longer made (four runs 2017-2024 - year unverified)

Beam compass system for laying out and cutting circles and arcs, with interchangeable points and pencil or router carriers riding on a graduated bar. Radius is set directly off the bar scale, so large arcs get marked or routed without a shop-made trammel.

  • Beam compass for circle and arc layout
  • Graduated bar sets the radius directly
  • Interchangeable points and pencil holders
  • Carries a pencil for marking or a router for cutting
Retail price$179.99
Sales tax I paid$17.10
Total I paid$197.09
My price, no tax$100
49%offYou save$97off the $197.09 it costs new
See it at Woodpeckers
49JessEm Tool Setting Gauge
JessEm

Tool Setting Gauge

07305

A machined aluminum height gauge for setting router bits, saw blades and drill press depth against a sliding ruled scale, instead of stacking setup blocks or cutting test pieces. Stood on its side it sets fence-to-blade distance the same way. Made in Canada.

  • Range 0 to 2-1/2 in., graduated every 1/16 in.
  • Hard-anodized 6061 aluminum body, brass locking knob
  • Sets router bit height, saw blade height, and drill press depth
  • Stands on its side to set fence distance
  • Made in Canada
Retail price$89.99
Sales tax I paid$8.55
Total I paid$98.54
My price, no tax$50
49%offYou save$49off the $98.54 it costs new
See it at JessEm

Routing and edges

3

Jigs and bases that hold or steer a router, plus the four hand planes for easing an edge.

15Woodpeckers Mini Coping Sled
Woodpeckers

Mini Coping Sled

MINICS
Brand new, never used

A compact fence-guided coping sled for narrow router-table work such as small door rails and stiles. The workpiece clamps underneath the phenolic base and rides directly on the table, so bit height is set normally with no extra projection.

  • 6 in. x 11 in. base, 3/4 in. thick phenolic
  • Workpiece clamps under the base, riding on the router table
  • Self-aligning jaw with non-slip grit face and attached handle
  • Clear polycarbonate fence guide over 17 in. long, doubles as guard
  • Takes workpieces to 4-5/8 in. wide with 3/4 in. backer
Retail price$129.99
Sales tax I paid$12.35
Total I paid$142.34
My price, no tax$100
30%offYou save$42off the $142.34 it costs new
See it at Woodpeckers
44Festool Edge Guide SA-OF 1010/MFK
Festool

Edge Guide SA-OF 1010/MFK

578054
Brand new, never used

The edge guide for the OF 1010 and MFK 700 routers, with a central clamp, tool-free fence jaws and a fine adjuster for setting the offset accurately. It runs rabbets, dados, grooves and flutes parallel to a workpiece edge.

Brand new, never opened. This one is a normal US catalogue part, unlike the German-only items further down.

  • Fits Festool OF 1010 and MFK 700 routers
  • Tool-free adjustable fence jaws, fine adjuster for offset
  • Supersedes the older Festool item number 495182
  • Dust extraction hood is not included
  • Sealed in the European multilingual box, part is identical
Retail price$74.00
Sales tax I paid$7.03
Total I paid$81.03
My price, no tax$52
36%offYou save$29off the $81.03 it costs new
See it at Festool
50Rockler 22-Piece Forstner Bit Set
Rockler

22-Piece Forstner Bit Set

A full range of Forstner bits from 1/4 in. up to 2-1/8 in., in the maker's blue plastic case with a slot for every size. Forstner bits are guided by their rim rather than a center point, so they bore flat-bottomed holes cleanly even at an angle or across end grain — hinge cup mortises, stopped holes, and overlapping bores that a twist bit cannot do cleanly.

  • 22 bits, 1/4 in. to 2-1/8 in. in 1/16 in. steps
  • Max 870 RPM, stamped on every shank
  • Flat-bottomed, clean-sided holes; cuts across end grain and at an angle
  • Used for hinge cup mortises, stopped holes and overlapping bores
  • Molded blue plastic case, one slot per size
Retail price$209.99
Sales tax I paid$19.95
Total I paid$229.94
My price, no tax$100
57%offYou save$130off the $229.94 it costs new
See it at Rockler

Joinery and clamps

9

Doweling, Domino and shelf pin tooling, and the clamps that hold the work while the glue goes off.

25Woodpeckers Ultimate Doweling Jig
Woodpeckers

Ultimate Doweling Jig

UDJ-21SYS
Brand new, never usedOne-Time Tool - no longer made (2016 or 2021 run - year unverified)

Doweling jig with four synchronized drill bushings whose spacing adjusts continuously from 3/4 in. to 1-1/4 in. on center, so the dowel array gets sized to the joint. A threaded stop rod locates the first hole up to four feet from the board end.

  • Bushing spacing variable 3/4 in. to 1-1/4 in. on center
  • Fence adjusts in 1/32 in. steps, 7/32 in. to 1-3/8 in.
  • Stop rod in four 1-foot threaded sections
  • Includes 1/4 in. and 3/8 in. drill guides and pins
  • Fence and clamp bar remove for mid-panel drilling
Retail price$369.99
Sales tax I paid$35.15
Total I paid$405.14
My price, no tax$350
14%offYou save$55off the $405.14 it costs new
See it at Woodpeckers
30Woodpeckers Hole Boring Jig
Woodpeckers

Hole Boring Jig

HBJ-19
Brand new, never used

A phenolic template for drilling a full grid of 20mm or 3/4 in. dog holes into a benchtop to build your own MFT-style work surface. Index pins locate it off the table corner, then off holes already cut, stepping across without cumulative error.

Former One-Time Tool (2017 run) - now a regular catalog item

  • 3/8 in. thick solid phenolic, CNC machined
  • Bores 20mm Festool and 3/4 in. Veritas hole standards
  • Guide bushings and index pins for both sizes included
  • Needs a router taking Porter-Cable style guide bushings
  • Uses a 1/2 in. straight bit, up-cut spiral recommended
Retail price$199.99
Sales tax I paid$19.00
Total I paid$218.99
My price, no tax$135
38%offYou save$84off the $218.99 it costs new
See it at Woodpeckers
58Sommerfeld's Tools Easy Bore Hinge Boring Jig
Sommerfeld's Tools

Easy Bore Hinge Boring Jig

ST-SHB

A hand-clamped boring jig that drills the 35mm cup hole and both 8mm mounting holes for European concealed cabinet hinges in one setting, with no drill press. The cast-aluminum body clamps to the door edge, numbered stops dial in the hinge overlay to Blum specs, and the carbide-tipped bits run in spring-loaded brass bushings off any 1/2 inch hand drill.

Used, in excellent condition. The only used item of the September additions; everything else came in new.

  • Drills the 35mm cup and two 8mm dowel holes in one setting
  • Depth-adjustable carbide-tipped 35mm bit with spurs, 8mm bits preset
  • Cast-aluminum frame, about 3.5 lbs, bits in keyed brass bushings
  • Numbered stops set the overlay: #2 for 1/2 in., #3 for 3/8 in.
  • Clamps to the door edge and runs off a 1/2 in. hand drill
  • Made for press-in Euro hinges that tap in with a hammer
Retail price$179.90
Sales tax I paid$17.09
Total I paid$196.99
My price, no tax$75
62%offYou save$122off the $196.99 it costs new
See it at Sommerfeld's Tools
27Woodpeckers Box Clamps, eight-clamp set
Woodpeckers

Box Clamps, eight-clamp set

BC4-M2
Brand new, never used

Corner clamps that pull a 90 degree joint tight and flush while the glue sets, positioned against a scale moulded into the base so both parts draw up under equal pressure. Swapping the clamping bolt for the knob turns each one from a bench fixture into a hand-held clamp.

  • Eight clamps, sold four pairs at a time in the catalogue
  • Works flat on the bench or hand-held on upper assemblies
  • Scale moulded into the base for repeatable positioning
  • Changes between the two modes in seconds
  • This set includes extra hardware beyond the standard pair
Retail price$159.96
Sales tax I paid$15.20
Total I paid$175.16
My price, no tax$125
29%offYou save$50off the $175.16 it costs new
See it at Woodpeckers
22Woodpeckers CSS24 (2 Sets)
Woodpeckers

CSS24 (2 Sets)

CSS24
Brand new, never usedOne-Time Tool - 2018 run, no longer made

Four powder-coated steel bars notch together egg-crate style into a 24 in. square frame that holds bar or pipe clamps upright and square to the panel edge. Pressure spreads evenly across the glue line instead of bowing the panel, and this lot is two sets.

  • Bars 3/32 in. thick, 3 in. wide, powder-coated steel
  • Notches every 4-3/4 in. resize the frame to the panel
  • Ten clamp positions per side for bar or pipe clamps
  • Assembles into a 24 in. square frame
  • Two complete sets; clamps not included
Retail price$199.98
Sales tax I paid$19.00
Total I paid$218.98
My price, no tax$100
54%offYou save$119off the $218.98 it costs new
See it at Woodpeckers
26Woodpeckers Side Kick Clamps, 4 in., pair
Woodpeckers

Side Kick Clamps, 4 in., pair

SKC-4PR
Brand new, never used

A pair of aluminum clamps that straddle a panel glue joint and hold the board ends in line while the bar clamps come up to pressure. A groove machined down the centre of both bars clears the glue line, and the ball knobs are spring loaded so each clamp stays put while you work.

  • Sold as a pair, machined and anodized aluminum, made in the USA
  • Centre groove on both bars straddles the glue joint
  • Spring-loaded ball knobs hold position before clamping
  • Top bar overhangs the bottom bar for easy spreading
  • Takes stock up to 1-1/8 in. thick
Retail price$64.99
Sales tax I paid$6.17
Total I paid$71.16
My price, no tax$45
37%offYou save$26off the $71.16 it costs new
See it at Woodpeckers
55Bessey Face Frame Cabinetry Clamp (single clamp; sold new as a pair)
Bessey

Face Frame Cabinetry Clamp (single clamp; sold new as a pair)

BES8511

A clamp built for face-frame cabinet installs: it tightens across the seam between two stiles, aligns the faces flush, and flips open a pilot-hole guide so you can drive the fastening screws without moving or removing the clamp. Sliding T-bars and felt-padded jaws, an Acme-threaded screw on the fixed end.

Sold new only as a pair of two; this is one clamp.

  • Works on stiles 1-1/2 to 2 in. wide, up to 1-1/4 in. thick each
  • Max opening 4 in., clamping strength 300-600 lb.
  • Integrated pilot-hole drilling guide, flips clear to drive screws
  • Felt-padded jaws, Acme-threaded screw
Retail price$15.50
Sales tax I paid$1.47
Total I paid$16.97
My price, no tax$10
41%offYou save$7off the $16.97 it costs new
See it at Bessey
56MicroJig GRR-RIPPER 3D Pushblock, pair, with sealed Gravity Heel Kit
MicroJig

GRR-RIPPER 3D Pushblock, pair, with sealed Gravity Heel Kit

GR-100

Two GRR-RIPPER 3D pushblocks, the full-featured version with the adjustable leg carriage that straddles the blade and pushes the workpiece down, in, and forward all at once. Sold with an unopened Gravity Heel Kit that swaps on to auto-drop behind the stock and hook it through the cut, plus one more sealed spare foot.

The Gravity Heel Kit and the spare foot are sealed and unopened; both pushblocks show normal shop use.

  • Two GRR-RIPPER 3D pushblocks with adjustable leg carriage, rips down to 1/4 in.
  • Gravity Heel Kit (GRGH-040): 5 heels, 2 spacers, sealed and unopened
  • One additional spare pushblock foot, sealed and unopened
  • Non-slip Green-GRIP pads on all contact surfaces
  • Three directions of hold: down, into the fence, and forward
Retail price$115.98
Sales tax I paid$11.02
Total I paid$127.00
My price, no tax$50
61%offYou save$77off the $127.00 it costs new
See it at MicroJig
57MicroJig GRR-RIP Block
MicroJig

GRR-RIP Block

GB-1

A handheld push block with a built-in gravity heel that drops down to hook the tail end of a workpiece and retracts on its own as it rides over the wood. No adjustable legs or carriage, just the block itself, for jointers, band saws, router tables and shapers where the full 3D pushblock is more than the pass needs.

  • Green-GRIP non-slip pad for grip on the workpiece
  • Built-in gravity heel, auto-retracting
  • Reversible angled handle, flip guide for veneering or resawing
  • For jointers, band saws, router tables and shapers
Retail price$29.90
Sales tax I paid$2.84
Total I paid$32.74
My price, no tax$20
39%offYou save$13off the $32.74 it costs new
See it at MicroJig

Tables and guides

5

Both MFT/3 tables and the track saw gear that works with them.

36Festool MFT/3 Basic Multifunction Table (Table Only)
Festool

MFT/3 Basic Multifunction Table (Table Only)

MFT/3 Basic
Pickup only, too big to ship

The MFT/3 Basic is the table on its own, the same 45 x 30 inch perforated MDF top and folding frame, with V-groove channels for Festool clamps. It suits anyone who already owns rails and stops and only needs the bench.

  • 45 x 30 in. top (1,157 x 773 mm), perforated MDF
  • Working height 35 in.; 7-3/32 in. folded
  • Load capacity 264.5 lbs; weight 61.7 lbs
  • V-groove side channels accept Festool clamps and accessories
  • Table only: no guide rail, swivel unit, angle stop or clamp
Retail price$745.00
Sales tax I paid$70.77
Total I paid$815.78
My price, no tax$550
33%offYou save$266off the $815.78 it costs new
See it at Festool
47Magswitch Universal Featherboard
Magswitch

Universal Featherboard

8110015

A magnetic featherboard that clamps to a cast-iron or steel table top or fence with a twist of the two built-in magnets, holding stock against the fence or table without needing a miter slot to mount into. Turning the magnets off lifts it free in a second, so it moves between the table saw, band saw, jointer and router table as the job changes.

  • Two switchable 20mm Magswitch magnets, 95 lbs breakaway force each
  • Mounts to any cast-iron or steel surface, no miter slot required
  • Works on table saws, band saws, jointer tables and router tables
  • High-impact ABS body (UL94V0 rated) with rare-earth magnetic units
  • 6.9 x 3.9 x 2.1 in., 0.9 lbs
Retail price$74.99
Sales tax I paid$7.12
Total I paid$82.11
My price, no tax$55
33%offYou save$27off the $82.11 it costs new
See it at Magswitch
48Magswitch Dual Roller Guide
Magswitch

Dual Roller Guide

8110130

A pair of sealed roller bearings on a low-profile bracket that gives infeed and outfeed support as stock feeds past the blade, steadying tall or wide boards and resaw cuts on the band saw. A micro-adjuster squares it to 90 degrees once it is in place.

Mounts to the Magswitch Universal Mounting Base and MagJigs, which are not included and are sold separately.

  • Dual sealed roller bearings, non-marring contact surface
  • Micro-adjustment mechanism for fine-tuning alignment to 90 degrees
  • Mounts to the Magswitch Universal Mounting Base and MagJigs, sold separately
  • Low-profile design suited to small tables
  • 8.5 x 1 x 4 in., 1.1 lbs
Retail price$39.99
Sales tax I paid$3.80
Total I paid$43.79
My price, no tax$30
31%offYou save$14off the $43.79 it costs new
See it at Magswitch
53SawStop Zero-Clearance Dado Table Insert with Lock-Down Lever
SawStop

Zero-Clearance Dado Table Insert with Lock-Down Lever

TSI-DLD

A phenolic zero-clearance insert for 8 in. dado stacks, so the workpiece is supported right to the edge of the cut instead of dropping into the saw's stock throat plate opening. The lock-down lever pulls it flush and holds it there without a screwdriver, which matters on a dado insert since it takes more force in use than a standard blade insert does.

Brand new, sealed in the original box.

  • Phenolic, for 8 in. dado blade stacks
  • Tool-free lock-down lever holds the insert flush to the table
  • Fits SawStop cast-iron saws (ICS, PCS, CNS); not for the Jobsite saw
  • Brand new, sealed in the original box
Retail price$75.00
Sales tax I paid$7.13
Total I paid$82.13
My price, no tax$70
15%offYou save$12off the $82.13 it costs new
See it at SawStop
59DeWalt DW7670 8 in. 24-Tooth Stacked Dado Set
DeWalt

DW7670 8 in. 24-Tooth Stacked Dado Set

DW7670
Brand new, never used

An 8 inch stacked dado set for table saws with a 5/8 inch arbor: two 24-tooth carbide outside blades sandwich up to six chippers and stainless shims to cut flat-bottomed grooves from 1/4 to 29/32 inch wide in one pass. It is the joinery workhorse for dadoes, rabbets, tenons and half-laps in hardwood, plywood and melamine, and DeWalt has since discontinued the set in favor of a 12-tooth successor.

Brand new in the box. Discontinued by DeWalt, still stocked at Lowe's at $140.

  • Two 24-tooth micro-grain carbide outside blades, 1/8 in. kerf each
  • Six chippers: four 1/8 in., one 1/16 in., one 3/32 in.
  • Twelve stainless shims for fine width adjustment
  • Cuts 1/4 in. to 29/32 in. wide dadoes, 5/8 in. arbor
  • Heavy-gauge laser-cut plates, 7,000 RPM max
  • Fitted storage case protects the teeth
Retail price$140.00
Sales tax I paid$13.30
Total I paid$153.30
My price, no tax$100
35%offYou save$53off the $153.30 it costs new
See it at DeWalt

Power tools

5

The miter saw lot, both random orbit sanders, and the jigs and lights that go on a machine.

37Milwaukee Tool M18 5-inch Random Orbit Sander (2648-20) w/ M18 XC 5.0Ah Battery
Milwaukee Tool

M18 5-inch Random Orbit Sander (2648-20) w/ M18 XC 5.0Ah Battery

2648-20 + 48-11-1850

A cordless 5 inch random orbit sander with a 3/32 inch orbit and a 7,000 to 12,000 OPM speed dial for dropping pad speed on finish passes. Milwaukee sells the 2648-20 as a bare tool; an M18 XC 5.0 Ah battery is included here.

  • 5 in. hook-and-loop pad, 3/32 in. orbit
  • Variable speed dial, 7,000 to 12,000 OPM
  • Onboard dust canister with filter; hose adapters for a vac
  • In the box: sander, canister, adapters, two 80-grit discs
  • Includes M18 REDLITHIUM XC 5.0 Ah battery, 48-11-1850
Retail price$318.00
Sales tax I paid$30.21
Total I paid$348.21
My price, no tax$100
71%offYou save$248off the $348.21 it costs new
See it at Milwaukee Tool
40Festool LM-RTS Light Module (PN 578836) [NIB EU Import]
Festool

LM-RTS Light Module (PN 578836) [NIB EU Import]

LM-RTS
Brand new, never usedNot sold in the US

A clip-on COB LED work light for Festool's small sanders, 60 LEDs at 50 or 135 lumens, throwing raking light so scratches and swirl show while you sand. It starts and stops on the tool's vibration, so it only runs while the sander does.

Brand new in the box. Bought in Germany and not sold in the US, so there is no US price to compare against.

  • COB LED, 60 diodes; 50 or 135 lm at 5,000 K
  • Runtime 250 min level 1, 150 min level 2
  • USB-C charge in 85 min; 3.7 V, 1,000 mAh Li-ion
  • IP 54 housing, 0.12 kg, tool-free clip-on mount
  • Fits RTSC 400, RTS 400 REQ, ETSC 125, ETS 125 REQ
My price, no tax$120
No US price to compare with
See it at Festool
41Festool LM-TS/TSC Light Module for TS 55 and TSC 55
Festool

LM-TS/TSC Light Module for TS 55 and TSC 55

578591
Brand new, never used

A magnetic LED module that lights the right hand side of a track saw cut at 40 or 70 lumens, keeping the score line visible on dark stock. It clips to steel plates you stick to the saw, so it lifts off in a second and can move between machines.

Priced about the same as the $49.00 pre-order price for Festool's US launch of this part on 2026-09-23 (confirmed at Woodcraft, Edward B. Mueller Co. and Tool Nut), not because it is scarce or discontinued.

  • 40 or 70 lm in two levels
  • Runtime 390/210 min by level; USB-C recharge about 120 min
  • Magnetic mount on adhesive metal plates; tool-free on and off
  • Each module ships with 2 metal plates and USB-C cable
  • Fits TS 55, TSC 55, TS 60 K and TS 75
My price, no tax$50
See it at Festool
33MicroJig MICRODIAL Tapering Jig
MicroJig

MICRODIAL Tapering Jig

TJ-5000
Brand new, never used

A table saw tapering jig with two calibrated dials, one in degrees and one in rise over run, so a taper is set numerically instead of by trial cuts. Two MemoryLocks hold separate settings, so four and eight sided legs come out matched.

  • Taper range 0-10 degrees in 1/8-degree increments
  • Second dial reads rise over run, 0 in. to 2 in.
  • Two MemoryLocks hold two settings for repeat cuts
  • Cuts 2-, 4-, 6- and 8-sided tapers
  • Box: jig, manual, instructional DVD, project-log template
Retail price$129.99
Sales tax I paid$12.35
Total I paid$142.34
My price, no tax$80
44%offYou save$62off the $142.34 it costs new
See it at MicroJig
54Wagner FLEXiO 3000 HVLP Paint Sprayer
Wagner

FLEXiO 3000 HVLP Paint Sprayer

0529121

A handheld HVLP sprayer with an integrated turbine, strong enough to spray unthinned latex and oil-based paints, stains and primers straight from the cup rather than the thin finishes some HVLP guns are limited to. It comes with two nozzles: the iSpray head for broad coverage on fences and walls, and a Detail Finish head for cabinets and trim, plus a 1.5-quart and a 1.5-pint cup, all in the original hard case.

  • Handheld HVLP with integrated turbine, 120V / 60Hz / 5.0A
  • Sprays unthinned latex and oil-based paint, stain, primer and sealer
  • iSpray nozzle (broad coverage) and Detail Finish nozzle, both included
  • 1.5-quart and 1.5-pint cups, adjustable flow and spray pattern
  • Original Wagner hard carry case
Retail price$149.00
Sales tax I paid$14.16
Total I paid$163.16
My price, no tax$65
60%offYou save$98off the $163.16 it costs new
See it at Wagner

Beyond the shop

2

Not woodworking tools — house and office gear from the same clear-out.

60Yale Assure Lock 2 Touch Smart Deadbolt, fingerprint entry
Yale

Assure Lock 2 Touch Smart Deadbolt, fingerprint entry

YRD450-F
Brand new, never used

Yale's flagship biometric smart deadbolt: touch the reader built into the keypad and the door unlocks in under half a second, with PIN codes, the Yale Access app and voice assistants as backups. It replaces a standard deadbolt with just a screwdriver, runs on four AA batteries, and locks itself behind you once the DoorSense sensor confirms the door is closed.

Brand new, sealed in the box.

  • Fingerprint reader in the keypad, under half a second to unlock
  • Prints stored on the lock itself, AES 128-bit encrypted
  • Touchscreen PIN keypad, Yale Access app, Alexa, Google and Siri
  • Auto-locks once DoorSense confirms the door is closed
  • ANSI Grade 2, IPX5 weather rated, four AA batteries included
  • Screwdriver-only install, fits 2-3/8 and 2-3/4 in. backsets
Retail price$209.99
Sales tax I paid$19.95
Total I paid$229.94
My price, no tax$125
46%offYou save$105off the $229.94 it costs new
See it at Yale
61Ergotron HX HD Heavy Duty Monitor Arm, for curved ultrawides
Ergotron

HX HD Heavy Duty Monitor Arm, for curved ultrawides

45-647-224
Brand new, never used

The heavy-duty version of Ergotron's HX single-monitor desk arm, fitted with the upgraded HD tilt pivot that floats extreme 1000R curved ultrawides, like the 49 inch Samsung Odyssey G9, that ordinary arms cannot hold level. It clamps or grommet-mounts to the desk and replaces the monitor's factory stand, reclaiming the whole desktop.

  • Holds one 28 to 42 lb monitor, up to 49 in., 6 to 12 in. deep
  • HD pivot tuned for 1000R deep-curve ultrawides
  • VESA 75x75 and 100x100 mm
  • 11.5 in. of lift, 23.6 in. extension, 20 degree tilt, 360 rotation
  • Two-piece desk clamp and grommet mount, integrated cable routing
  • BIFMA certified, $505 list, 10-year Ergotron warranty
Retail price$364.99
Sales tax I paid$34.67
Total I paid$399.66
My price, no tax$200
50%offYou save$200off the $399.66 it costs new
See it at Ergotron